Pressure solar collector
Use heat pipe collector to supply hot water.This product can work under certain pressure and supply water to a high and far place.
1.Product model: XK-PC
2.Can be matched with any low pressure,high pressure hot water system.
3.Use heat pipe for the heat conduction and can get a high heat absorbtion efficiency and rapid heat transfer.
4.Easy plug-in design and installation.
5.Corrosion-resist Aluminium manifold and frame.
6.Optional 38°/45°frame can resists wind with a velocity of 36m/s.
7.Can supply hot water to large amount water needer.
8.Economical for hotel,school,domitory,hospital and tall high-buildings.
|
Inner manifold material |
Red copper channel |
|
Outer shell material of manifold |
Aluminium alloy |
|
Frame material |
Aluminium alloy |
|
Heat pipe material |
99.93% pure cooper & lead free, 45% silver brazing |
|
Rubber Seals and rubber Rings |
HTV grade silicone rubber |
|
Optional installation angle |
0°,30°,38°, 45° |
|
Maximum Operating Pressure |
12 bar |
|
Optional flow rate |
0.1L/min/tube – 0.026G/min/tube |
|
Vacuum tube |
Ø47-1500mm, Ø58-1800mm with heat pipe |
|
Daily efficiency |
=55% (=42% in winter) |
|
Hailstone resistance |
Dia=25mm |
|
Heat pipe anti-freezing |
=-35? |
|
Life span |
Approximate to 15 years |
Real product picture
Product work principle
