Home About Us Audit Report FAQ Order Contact
Product
 
Non-pressure solar water heater
Integrated and pressuized Solar Water Heater
Separated and Pressurized Solar Water Heater
Balcony series
Non-pressure solar collector
Pressure solar collector
Solar water heater accessories
Controllor
Electrical heater

 
Contact
 

Tel: 0086-573-87817298 / 87872881
Fax:0086-573-87872882 / 87813424
E-mail: Please contact with our online service by

info@xiankesolar.com

 

 
Products Home<Products
 
Non-pressure solar water heater
Non-pressure solar water heater is a kind of compact system of solar collector and water storage tank.The whole system relies on the different density of cold water and hot water,thus Non-pressure solar water heater also called thermal- siphonal solar water heater.
 
The system can work without the circulation pump and no heat pipe connection.The cold water directly filled into the vacuum tubes,the vacuum tubes gather energy and heat the cold water,the lighter hot water rise up into the water tank and cold water come down then be reheated.That how the water do circulation by itself.Please see (fig.1) for its workprinciple.

Fig.1

 
Non-pressure solar water heater system is most economical and suitable product for low latitude country and regions,especially for Asian,Africa,,Oceania, South America and South part of North America.
 
Optional accessories: controllor and electrical heater.
 
 
Product information:
1.  Product model: XK-NP
2.  Vacuum tube: Ø47-1500mm, Ø58-1800mm co-axial structure high borosilicate 3.3 glass vacuum tube.
3.  Inner tank material: SUS304-2B Stainless Steel with thickness of 0.4mm .
4.  Outer tank material: Color powder coating steel / Stainless steel.
5.  Frame: Galvanized steel plate with thickness of 1.5mm
6.  Frame angle: 25°,38°or 45°
7.  Capacity of water tank: 90L~324L.
8.  Heat preservation layer: high pressure automatic polyurethane foaming layer with thickness of 55mm.
9.  Heat preservation: 72 hours
10.Hailstone resistance: Dia=25mm
11.OEM & ODM product
 
Real product pictures
 



 
Integrated and pressuized Solar Water Heater
This product is also called"Pre-heat and pressurized solar water heater", is a new product of XIANKE.It combins the advantages of Non-pressure solar water heater and Separated pressurized solar water heater together.Frankly speaking,the system is put a copper coil inside the Non-pressure solar water heater water tank,there is a pressure exists in the copper coil,the hot water inside the water tank is hot resource.This product improves the problems of traditional solar water heater as limited hot water volume,long heat time,few out water,the worse water quality.The “twice heat exchange” technology makes the high temperature,high efficiency and fast hot water circulation come true.
 
The vacuum tube collector absorbs heat energy to heat the water in the storage tank,when opening the valve,cold water flow through the inlet and then to the cooper coil,the hot water in the water tank do heat exchange via cooper coil with the cold water,when cold water flow through the copper coil,its temperature been rised gradully,finally the outlet water is hot water (the temperature maybe = 5? lower than the hot watr in the water tank).The copper coil can bear the pressure from the running water.
 
Product information:
1.Product model: XK-IP
2.Inner tank material: food grade SUS304-2B with thickness of 0.4mm.
3.Outer shell material:galvanized steel sheet with thickness of 0.4mm.
4.Vacuum tube: Ø58-1800mm / Ø58-2000mm vacuum tube.
5.Assistant tank: 5L,7L,10L,12L
6.Recommend copper coil length: 150L for 30m,200L for 35m,300L for 35m.
7.Frame: Galvanized steel plate with thickness of 1.5mm
8.Optional angle of frame: 38°/45°
9.Pressure bearing: =0.7Mpa
10.Daili efficiency:=55% (=42% in winter)
11.Haistone resistance: Dia=25mm
Total 16 products  Home Former Next End Page:1/8  2products  Turn topage
 
Copyright © 2008-2009 Haining Xianke Solar Energy Technology CO.,LTD. All Rights Reserved
Tech Supported By: Hangzhou Chuangyi IT CO.,Ltd.( Shangying Net).